SME Tonarm SME V 12 Zoll GPD Magnesium

SME Tonarm SME V 12 Zoll GPD Magnesium
7.000,00 € *

inkl. MwSt. | Versandkostenfrei

oder z.B. 36 Raten à 194,44 € mit der 0% Finanzierung!
  • SME002
  • SME
  • ca. 3 - 5 Werktage
Tonarme und Analog-Laufwerke der Spitzenklasse – made in England
Magnesium Tone-arm Based on the multi-award winning Series V pick-up arm, the Series V-12... mehr
SME Tonarm SME V 12 Zoll GPD Magnesium

Magnesium Tone-arm

Based on the multi-award winning Series V pick-up arm, the Series V-12 incorporates the same design and engineering that have made SME a byword for excellence. Coherent musical control is held over the entire frequency range in terms of tonal quality, stability and stereo imaging. Startling dynamic range, neutrality, structurally inert, the Series V-12 embodies every worthwhile feature in a pick-up arm.

The 12 inch tone-arm is pressure die-cast in magnesium complete with an Integrated headshell to eliminate tone-arm resonances in the audio spectrum and offers a 27% reduction in maximum angular error distortion over 9 inch models. Listening: the benefits of minimal tracking error and harmonic distortion are clearly revealed.

SME Series V-12 Graph

  • The 12in pressure die-cast tone-arm utilises the advantages of magnesium and exploits the reduction in maximum tracking error/distortion afforded by the greater arm length when compared with 9in models.
  • Internal constrained layer damps minute residual vibration leaving the tone-arm acoustically inert.
  • Fine machined cartridge platform, enamel free to avoid interface resonance.
  • Stainless steel cross shaft, ground and thread ground. Carried in massive yoke on Ø10mm precision ball races. Axes at record mean level to minimise warp-wow.
  • Dynamic balance. Graduated vertical tracking force control applies up to 3.0g x 0.125g VTF through resonance controlled spring.
  • Stainless steel vertical shaft, ground and thread ground, with integral Ø16mm flange to couple shaft and yoke.
  • Ø23mm steel pillar, heat treated, ground and honed, carries two Ø17mm precision ball races, widely spaced to resist tilt.
  • Anti-skate control operates through tension spring and filament. Dial corresponds with VTF and has a positive OFF position.
  • Lowering/raising control gives smooth positive action. Height of lift can be adjusted.
  • Subsonic lateral-mode damper can be instantly adjusted or cancelled.
  • Dual-lock base provides movement control with high rigidity.
  • Tungsten-alloy balance carried on two-point suspension. Extra-low inertia design assists warp riding.
  • Underslung weight housing corrects centre of gravity and provides non-reflective tone-arm termination.
  • Swivelling, damped output socket minimises vibration transmission in sub-chassis use.
  • Fine adjustment of horizontal tracking angle (HTA).
  • Reference lines on tone-arm facilitate VTA setting.
  • Fine adjustment of horizontal tracking angle (HTA).
  • Alignment protractor designed to provide HTA setting with greater accuracy.
  • Advanced jig/template system guarantees correct positioning.

Series V-12 Specifications

  • Distance from pivot to stylus: 308.80mm Effective mass 12.0g
  • Distance from pivot to turntable centre: 295.60mm Cartridge balance range 5.0 - 32.0g
  • Cartridge fixing centres: 12.70mm + One accessory weight - up to 26.5g
  • Offset angle: 17.62° + Two accessory weight - up to 32.0g
  • Linear offset: 93.47mm Maximum tracking error 0.009°/mm
  • Overhang: 13.20mm Null points Inner 66.04mm Outer 120.90mm
  • Height above mounting surface: max. 87.90mm min. 56.40mm Internal wiring Ultra-flexible Silver litz
  • Height of record surface above mounting surface: max. 55.90mm min. 24.40mm Audio lead Length 1.2m
  • Depth below mounting surface: 56.75mm Weight net 815.0g
  • Radial clearance for balance weight: 73.0mm
Weiterführende Links zu "SME Tonarm SME V 12 Zoll GPD Magnesium"
Einfach finanzieren … mehr

0% Finanzierung DE und AT

1166,67€x6 Mon.=7000€
583,33€x12 Mon.=7000€
388,89€x18 Mon.=7000€
291,67€x24 Mon.=7000€
194,44€x36 Mon.=7000€

Zum Finanzieren kontaktieren Sie uns bitte:
+49 (0) 8321 / 61 88 400

Bewertungen lesen, schreiben und diskutieren... mehr
Kundenbewertungen für "SME Tonarm SME V 12 Zoll GPD Magnesium"
Bewertung schreiben
Bewertungen werden nach Überprüfung freigeschaltet.

Die mit einem * markierten Felder sind Pflichtfelder.

Ich habe die Datenschutzbestimmungen zur Kenntnis genommen.

SME Tonarm 309 SME Tonarm 309
2.400,00 € *
ab 99.990,00 € *
Zuletzt angesehen